Solar Panel Gate

Your guide to solar and renewable power. We review the most effective home solar power guides online

Dec 17

Make DIY Solar Power Panel for Your Home

: Image via Wikipedia

You need a solar panel information how to create or build their own solar panels and is easily found on the Internet that offered by some energy sites.

Purchase Solar Cells
Available from eBay in many different sizes and prices. Each solar cell and retrieve, 5-volt solar cell 36 to make solar panels connected in series to produce 18 volts that are ideal for charging 12 volt batteries.

Note.
Some of this solar cell has a metal tab or wire soldered to them and you'll pay extra for the tab cells. Tab solar cells will save a lot of solder and the time when you start building your solar panels.

Build Solar Panel Frame
What is a solar panel? It is basically a box that stores an array of solar cells.
You can build a wood frame, aluminum frame or a corner to find a suitable material for making solar panel frame. Side street, station signs, bill boards shop all make a great frame to do it yourself solar panels.

Advantages of using the signs above the old iron wood they survive long in the weather and the sun.
To protect from the weather solar cell, solar panels will have a plexiglass front.
Glass can also be used for this, but the fragile glass. Hailstones and flying debris that will destroy the glass will just bounce off of the plexiglass

Solar Cells cable connection
Layout and position of each solar cell tile spacer placed between each cell and mark the position of solar cells on lightweight support boards with a pencil.
The secret here is to have a small amount of glue on the spacer to make sure to not move while performing the remaining cells. When finished you will have a board with a spacer all in a place where you put the cells for soldering. Maintaining this forum as a pattern for later use.

Put a wire soldered from the front of one cell in the solder points on the back of the other cells continue this until the line of 9 cells soldered together. Then make three rows of 9 cells.
Arrangement will be in accordance with the frame design but the most popular are 4 rows of 9 solar cells connected in series.

How to Determine Volts, Amps, and Watts.
When building a solar panel or solar panels for, you should always know the end of watts, volts, and amps that you want to produce solar panels.

In determining the total power from solar panels that we use this simple equation:
Equals watts multiplied by Amps Volts, so it is important to understand this formula.
Knowing only a two-part formula, you can also obtain the third component.

For example, understanding the basic formula
V (volts) x A (amps) = W (watts)
Allows us to derive from the 100 watt amp 18 volt panel.
V x A = W or W / V = A
100W / 18V = 5.55 amps

Solar Panel position.
The most common place for the solar array on the house. Consideration was given to what could be blocking sunlight to the panel.
Large trees is a major concern but also the roof line plays a major role in which the position of the panel.
The direction of travel of the sun at home.
The efficiency of solar panels depends on the full sun.

articlesbase.com